AVG 9.0 FILE SERVER - REV 90.1 Uživatelský manuál stáhnout pdf (Strana 8)

Ubigate# file copy /cf0/system.cfg /cf0/delete.cfg Å copy a file

Ubigate# file rm /cf0/delete.cfg Å remove delete.cfg from flash card

Ubigate#

Display the LAN status

Use the following command to display the Ethernet (ethernet 0/1) interface status and packet

Ubigate# show interface ethernet 0/1

statistics:

ethernet0/1

ipaddr 10.10.10.1

netmask 255.255.255.0

description -

status admin (UP), link (DOWN)

FlowControl Disable

configured auto

speed -

mode -

mtu 1500

ethernet0/1 (unit number 1)

Type: ETHERNET (802.3)

Flags: (0xa078203) UP, ATTACHED, BROADCAST, MULTICAST-ROUTE

Internet Address: 10.10.10.1

Internet Netmask: 255.255.255.0

Internet Broadcast: 10.10.10.255

Interface RED is enabled

Maximum Transfer Unit: 1500 bytes

Mac Address: 00:16:32:ff:22:76

port counters since last boot/clear

Bytes Rx 0 Bytes Tx 0

Packets Rx 0 Packets Tx 0

Runts Rx 0 Collisions 0

Babbels Rx 0 Late Collisions 0

Err Packets Rx 0 OverSize packets 0

Up/Down States (Phys) 1

Up/Down States (Admin) 0

port counters for the last five minutes

Bytes Rx 0 Bytes Tx 0

Packets Rx 0 Packets Tx 0

Runts Rx 0 Collisions 0

Babbels Rx 0 Late Collisions 0

Err Packets Rx 0 OverSize packet count 0

Up/Down States (Phys) 1

Up/Down States (Admin) 0

Display the IP status

Use the following command to display the layer3 (IP level) status of interfaces. This command also

Quick Reference Guide for Ubigate 1000 Page 8

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Komentáře k této Příručce

Žádné komentáře

AVG 9.0 FILE SERVER - REV 90.1 Uživatelský manuál Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Servery AVG 9.0 FILE SERVER - REV 90.1